Sponsored Links
'solid edge' Search Result
Content Inside:
This book provides a comprehensive step-by-step approach to learning Mastercam Mill 3D. The book includes eight projects, an additional 8 exercises and quizzes for each project to test your knowledge. The material covered includes 3D Wireframe and Surface geometry creation, Surface Finish and Surface Roughing Toolpaths. It also contains ...
Content Inside:
Nonlinear contact analysis of an O-Ring. A 5-inch circular vacuum chamber is sealed by an O-ring of a rubber like material. Due to the axial symmetry of model, the analysis is performed on a wedge of 1 degree angle. The O ring is compressed into the groove by the ...
Content Inside :
This tutorial guide leads you through the process of converting a 3D model file describing the shape of an F1 in Schools, R-Type car into the CNC file used to manufacture the solid 3D car body. In order to machine the solid 3D car body, you must create ...
Content Inside :
In this tutorial, we will learn the basics of performing motion analysis using COSMOSMotion. Although the tutorial can be completed by anyone with a basic knowledge of SolidWorks parts and assemblies, we have provided enough detail so that students with an understanding of the physics of mechanics will ...
Content Inside :
In this tutorial, you will create two parts; a shelf and a bracket. You will "assemble" them into one unit. Finally, you will generate drawings to work from. You are going to sketch a 2-dimensional image of a shelf that is 450mm long and 135mm wide. Then, you ...
Content Inside :
I recently finished converting my Smithy 1220 LTD to a CNC. I designed all the hardware from scratch, as everything that I found available seemed inadequate for my needs. I design electronics for a living, so it was no big deal to me. However, I was totally unprepared ...
Content Inside :
This is intended purely as a guide, nothing else, and I do not take responsibility for any damage you will more than likely cause to your console as a result of this process. You must take extreme caution when attempting to uncover the pins from the drive chip ...
Content Inside :
I was asked to show a simple example of how I go about creating surfaces to form something like that of a motorcycle gas tank. The tutorial that preceded this one had left a lot of people with some questions, like: Don’t you have something that will show ...
Content Inside :
In this tutorial, we’ll insert a freeform face from SurfaceWorks into a SolidWorks part. The new face will be tangent to the planar SolidWorks face that surrounds it, and durably attached to the SolidWorks edges. The part will end up being a drop-in tub. Concept and Function introductions: ...
Content Inside :
2D Drawings may take two forms: 2D Sketches show the outlines and locations of multiple shapes or parts to be designed. 2D Profiles must be closed shapes with no entities inside or crossing the sketch. The sketch at the right may be used to create a part by ...
Sponsored Links
Solid edge tutorial for beginner, step by step guide to design car racing. With a little more practice, far more complicated race winning designs can be achieved. Here we will
Part of Content :
Element Types and Geometries : CosmosWorks currently includes solid continuum elements and curved surface shell elements (thin and thick). The shells are triangular with three vertex nodes
Content Inside :
This tutorial guide leads you through the process of converting a 3D model file describing the shape of an F1 in Schools, R-Type car into the CNC file
Content Inside :
With the launch of Autodesk Inventor Series 10, MCAD caught up with Robert Kross, Vice President of Autodesk’s Manufacturing Solutions Division to ask a few questions on the
Content Inside :
I recently finished converting my Smithy 1220 LTD to a CNC. I designed all the hardware from scratch, as everything that I found available seemed inadequate for my
