Free eBook Download

This service bulletin will guide you to remove and install the New Rear CAM roller bearing assembly on Harley Davidson motorcycle. Cam bearings may be a loose fit in the cam support plate. To avoid possible damage, be aware that camshaft and bearing assemblies may drop out at start of ...

Content Inside : The Edelbrock Performer Series Carburetor has five (5) adjustments: 1. IDLE SPEED: Mechanical, raises and lowers slide to preferred idle RPM. 2. IDLE MIXTURE (900-1200rpm): Controlled by air bleed. 3. MID RANGE (1300-3500rpm): Controlled by needle setting/size. 4. FULL RANGE (3600-6000rpm): Controlled by main jet. 5. ACCELERATOR PUMP ...

Content Inside : SAFE INSTALLATION AND OPERATION RULES: Before installing your new S&S part it is your responsibility to read and follow the installation and maintenance procedures in these instructions and follow the basic rules below for your personal safety. Gasoline is extremely flammable and explosive under certain conditions and toxic ...

Content Inside : Harley Davidson recommends both gear lube and motorcycle oils for their equipment and there are many different models with corresponding specific oil recommendations. The variety of recommendations can cause confusion and lack of confidence in making the correct AMSOIL lubricant recommendation. The following charts outline the proper sequence ...

Content Inside : H-D® Smart Security System The H-D Smart Security System offers automatic self-arming and hands-free disarming for vehicle electronic security functions for your ’07-later Harley motorcycle. The Hands Free Fob communicates directly on its own unique and individualized frequency with the Hands Free Security Module and Antenna. Attach the ...

Part of Content : The HI-4 ignition system is intended for use with Harley-Davidson motorcycles. The HI-4 replaces the original equipment (OE) electronic ignition system on 1978 and later models as well as the points and mechanical advance on early models. 1996 and later models have a vehicle tilt sensor that ...

Guide to installing Air Horn on Harley Davidson Motorcycle, procedure : Remove the ½” acorn nut that attaches the stock horn and bracket. Remove the horn & bracket assembly from the stud it is mounted to and unplug the 2 wires. Plug the two wires from the loom onto the ...

Part of Content : The Analysis optimization using WAVE Cycle Analysis and an iSight Optimization Framework, The methodology was applied to analyze the power output of a Harley-Davidson Spark-ignition V-Twin engine as a function of fifteen complex design parameters (15 controllable factors.) The framework of the optimization entailed using a ...

Part of Content : Performance and Technical information on stock engines for Harley-Davidson motorcycles. Stage One Harley-Davidson engines involve no internal changes to be made. All modifications are made by bolt-on changes or modifications to external components on the engine. These components include air cleaners, carburetors, exhaust systems and ignition systems. ...

This manual has dedicated for Harley Davidson dealer before they deliver the motorcycle to the consumer. Contain information about : Section I–General Information: All Models Section ll–Predelivery Inspections: Touring Models Section lll–Predelivery Inspections: Dyna Models Section IV–Predelivery Inspections: Softail Models Section V–Predelivery Inspections: Sportster Models Section VI–Predelivery Inspections: VRSC Models ...