Content Inside :
On vehicle service : DRIVE BELT TENSION CHECK AND ADJUSTMENT. ALTERNATOR DRIVE BELT TENSION CHECK. Inspect the drive belt following the instructions below. Standard value. Connect the special tool (belt tension meter set) to the MUT-II. Connect the MUT-II to the diagnosis connector. Turn on the ignition switch ...
Content Inside :
Step by step removing timing belt, 1. Disconnect negative battery cable. 2. Remove upper and lower front timing belt covers. When aligning crankshaft and camshaft timing marks always
Content Inside :
Suzuki has received reports of overfilled engine oil at initial delivery. The VZR1800K6 uses the Suzuki Advanced Sump System (SASS). The system uses the transmission chamber as an
Content Inside :
Crankshaft pulley and belt cover. Install front belt cover : tightening torque(all bolts for belt cover), install right hand belf cover, install crankshaft pulley. Clean the crankshaft pulley
Content Inside :
A crankshaft variation relearn must be performed if: A diagnostic trouble code of P1336 is present. The computer has been replaced or re-programmed. The crankshaft position sensor has
Service your vehicle regularly to make your vehicle running smoothly, its a service recommendation every EVERY 3,000 MILES, Drain engine oil when hot and refill with 10W/30 Multigrade. In temperatures
