Content Inside :
How to replace Motor Mount at BMW E36, Tools needed: 1- 3/8” ratchet 2- 6” extensions 3- 10” extension 4- Swivel adapter 5– Six point 16mm socket You really need the extensions and swivel to do the job. Here are the new motor mounts and flange nuts. ...
Content Inside :
Suggested Tools for Installation: - 3/8" and 1/4” ratchet set and metric sockets - 9/16” Combo wrench K Hacksaw, sawzall, chopsaw - Jack and jackstands - Liquid penetrant and rubber lubricant. DISASSEMBLY 1. Lift and support vehicle on correct load rated jackstand on stable surface. 2. Unbolt I-pipe ...
DISASSEMBLY
1. CHECK COMPANION FLANGE RUNOUT
Using a dial indicator, measure the vertical and lateral runout of the companion flange. Maximum: runout: 0.10 mm (0.0039 in.) If the runout exceeds the maximum,
Content Inside :
Repair Manual, Body Interior, Repair Group 70; Pillars and side panel trim - Press interior rear-view mirror -1- downward at an angle off retaining plate (spring clip in
Content inside :
3 Mount the brake magnet using the 4 holes or slots in the mounting flange. Concentricity between the brake mounting pilot diameter and the shaft should be held
Part of Content :
The installation manual D-Series Spring Set Motor Brakes for Dodge vehicle, TEP 1 (180 only): Remove new brake from flange by loosening (4) mounting bolts (-16 UNC).
Content Inside :
EXTENSION HOUSING OIL SEAL ON–VEHICLE REPAIR 1. REMOVE DRAIN PLUG AND DRAIN ATF 2. REMOVE FRONT EXHAUST PIPE AND HEAT INSULATOR (See page EM–94) 3. REMOVE PROPELLER SHAFT
