Free eBook Download

This service bulletin will guide you to remove and install the New Rear CAM roller bearing assembly on Harley Davidson motorcycle. Cam bearings may be a loose fit in the cam support plate. To avoid possible damage, be aware that camshaft and bearing assemblies may drop out at start of ...

Content Inside : This book contain information about the Carburetor system, structure and how to tuning up, We have found that Harley-pattern engines tend to develop minor air leaks between the manifold and heads. These leaks affect air/fuel mixtures at low throttle settings and can be troublesome at idle. For best ...

Content Inside : The Edelbrock Performer Series Carburetor has five (5) adjustments: 1. IDLE SPEED: Mechanical, raises and lowers slide to preferred idle RPM. 2. IDLE MIXTURE (900-1200rpm): Controlled by air bleed. 3. MID RANGE (1300-3500rpm): Controlled by needle setting/size. 4. FULL RANGE (3600-6000rpm): Controlled by main jet. 5. ACCELERATOR PUMP ...

Content Inside : The Edelbrock Performer RPM Camshaft Kit for Harley-Davidson Twin Cam engines is designed to improve peak horsepower yet retain a broad torque range and improved rideability from 2800-6000+ RPM. Used in the Edelbrock Performer RPM Power Package, these cams have supported over 100hp at the wheels on a ...

Content Inside : SAFE INSTALLATION AND OPERATION RULES: Before installing your new S&S part it is your responsibility to read and follow the installation and maintenance procedures in these instructions and follow the basic rules below for your personal safety. Gasoline is extremely flammable and explosive under certain conditions and toxic ...

Contain Inside: Step by step installation : Remove the seat. Remove or raise the fuel tank. The tank needs to be raised enough to give access to the fuel injectors and TPS wires. Unplug the front injector. On the FI Controller, there are 2 pairs of injector connectors. Plug the pair ...

Content Inside : One has to check the ignition timing base model fitted on the bike. Some bikes have a wrong model ignition system mounted in respect to the year. This can be very confusing. Especially in the year 1947 where the timing base changed. Please read the installation instructions before ...

This manual has dedicated for Harley Davidson dealer before they deliver the motorcycle to the consumer. Contain information about : Section I–General Information: All Models Section ll–Predelivery Inspections: Touring Models Section lll–Predelivery Inspections: Dyna Models Section IV–Predelivery Inspections: Softail Models Section V–Predelivery Inspections: Sportster Models Section VI–Predelivery Inspections: VRSC Models ...

Installation instruction N41422 Peacemakers Exhaust for Harley Davidson Vehicle, 1. Wait for stock exhaust to cool down before beginning installation. 2. Position the motorcycle securely on a work stand or on its side stand. 3. Remove the two stock heat shield covers. (Flat Head Screwdriver). The exhaust hanger bracket must ...

This manual contain information about installing the Auxiliary LED brake for the Harley Davidson motor. If this manual states that this product may be mounted with suction cups, magnets, tape or Velcro™, clean the mounting surface with a 50/50 mix of propylene alcohol and water and dry thoroughly. It is ...