Its a step by step guide to replace timing belt and water pump on BMW 325e 1985 model years. I hope these pictures will help it all make sense. I took them as I was doing the job. Removal: The Fan & Clutch, the water pump pulley, the distributor cap & rotor and the drive belts. Remember, the 32mm nut opens CLOCKWISE as you look at the car. I used Channel-Locks and a strap wrench to hold the pulley still. I also used the strap wrench to hold the water pump pulley while I removed its 4 retaining bolts. Remove the 6 hex bolts from the crankshaft pulley, and remove it and the vibration damper behind it from the car. The vibration damper is indexed and has no separate bolts. The track came out very clean… everything was ready for re-assembly.
Download pdf document
Tags:crankshaft pulley, hex bolts, water pump replacement, vibration damper, 1985 bmw 325e
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.