Its an Air Conditioner - Heater System replacement guide and wiring diagrams for VW 1995-1996 vehicle that could applied for Cabrio, Golf, Golf III, GTI, Jetta & Jetta III. Here you’ll get explanation about the A/C heater systems and the location diagrams. Temperature flap cable adjustment, Ensure cable is connected to A/C-heater control panel and panel is installed. Remove cable sleeve retaining clip (cable sleeve is Blue). Disconnect cable from central flap lever. Adjust airflow distribution knob to defrost position. Connect cable to central flap lever. Push lever in direction of arrow until it stops. Testing: Ensure no bubbles are present in sight glass. See Fig. 1. Connect manifold gauge set to service valves. Press A/C NORM button. Set blower motor on 2nd speed. System is okay if air temperature at center vent is less than 50øF (10øC) after one minute and system operating pressures are within specification. Removal & Installation, Discharge A/C system using approved refrigerant recovery/recycling equipment. Remove front bumper. Remove instrument panel and support bracket. See INSTRUMENT PANEL. Remove evaporator housing. Exploded View Of A/C-Heater System Components. Instrument Panels. Exploded View Of Evaporator Housing.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS.  Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.