This ignition switch removal and installation guide could be applied for 1997 Accord (L4), 1998–99 Accord (L4 and V6), 1998–00 Civic, 1997–99 CR-V, 1997–00 Odyssey, 1997–99 Prelude. The repair procedure separated into 7 procedures for each vehicle and its contain step by step instruction complete with illustration. Procedure A: 1997 Accords, Remove the dashboard lower cover, the knee bolster, and the steering column covers. Disconnect the 7P and 8P connectors from the ignition switch body. Remove the steering column holder mounting bolts and nuts. Lower the steering column. Center-punch both shear bolts on the ignition switch body, and drill off each bolt head with a 5 mm (3/16 in.) drill bit. Be careful not to damage the switch body. Remove the shear bolts from the ignition switch body, and discard them. Then separate the switch body from the steering column. Remove the screws from the electrical switch, then remove the electrical switch from the ignition switch body. Discard the electrical switch. This ignition switch removal and installation manual available free to download in pdf format consists of 7 pages.
This service bulletin available free to download at www.driveaccord.net website.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS.  Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.