Content Inside:
This manual covers the assembly, installation, operation and maintenance. In order to accommodate various bands, this manual has extra pages you may not receive for your version. The two meter version will have pages numbered 1 through 7. Other bands
may have a higher number page substituted for the two meter parts list page, so pages may not all be consecutive. In order to accommodate various bands, this manual has extra pages you may not receive for your version. The two meter version will have pages numbered 1 through 7. Other bands may have a higher number page substituted for the two meter parts list page, so pages may not all be consecutive. Be sure to follow instructions as given and don’t arbitrarily do things differently. When installing resistors and diodes that are mounted vertically, be sure to orient the body as shown by large circles in parts location diagram. Static handling precautions are required for the fet’s. The small geometry and high impedances make FET’s heat and static sensitive; so be careful. It is good to discharge your hand to a grounded metal object just before picking up a transistor, and the use of a grounded soldering iron is mandatory. Assembly Procedure. Set board on bench or in holding jig oriented as shown. Install phono jack J1, orienting the center lug toward the inside of the board where the large pad is located under the board. Bend the center tab over against the foil, and solder all tabs under board. The crystal filters must be installed with uncoded ends to the outside world and the terminals which are connected to each other all with matching color dots. The idea is to connect these tandem filters in the circuit in the same sequence as they were matched at the factory. Start with either filter having only one color dot. Install in position FL1 with color dot to the right as shown.
Tags : color dots, vhf fm, meter version, hamtronics, receiver operation, color dot, crystal filters, assembly procedure, fm receiver, fl1, assembly installation, soldering iron, r100, fet, diodes
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.