Content Inside:
Throughout this install, there are steps that require the use of tools. Recommended tools and materials to obtain before installation are listed below: Philips head screwdriver • Flat head screwdriver • Magnetic pickup tool • Flashlight • Electrical Tape • Towel or cotton shirt (for use as rags to protect plastic trim) • Zip ties (for securing cables). To gain access to the stereo mounting screws, some of the interior trim must be removed first. Extend the cupholder above the radio and remove the two screws (one on
either side). Push down on the tab at the back and pull it out. Remove the bezel around the radio. It’s held in place by 6 friction clips
around the face – just pry it out slowly, working your way around the edges. Pull out the factory stereo, disconnect the plugs (antenna, stereo harness & grounding wire) and remove it from the vehicle to install the accessory board. Disassemble Factory Stereo: Once the radio has been removed from the car, it can be disassembled to gain access to the components inside where the accessory board will be installed. The first step in taking apart the stereo is to remove the mounting brackets on either side of the radio. Both brackets are held in place with 4 screws. Straighten the cable and verify the correct side is marked.
Tags : magnetic pickup tool, subaru wrx, philips head, mounting brackets, zip ties, accessory installation, factory stereo, grounding wire, head screwdriver, cupholder, electrical tape, cotton shirt, tools and materials, rags, flashlight
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.