Content Inside :
This manual may be reproduced in whole or part for study or training purposes subject to the inclusion of an acknowledgment of the source. It may be reproduced in whole or part by those involved in estimating the emissions of substances for the purpose of National Pollutant Inventory (NPI) reporting. The manual may be updated at any time. The manual was prepared in conjunction with Australian states and territories according to the National Environment Protection (National Pollutant Inventory) Measure. While reasonable efforts have been made to ensure the contents of this manual are factually correct, the Commonwealth does not accept responsibility for the accuracy or completeness of the contents and shall not be liable for any loss or damage that maybe occasioned directly or indirectly through the use of, or reliance on, the contents of this manual. Erratum for oil and gas exploration and production (EET) Manual, Introduction, Destinations substances are emitted to: air, water and land, 4. Emission estimation techniques, Determining emissions and reporting thresholds from Produced Formation Water, Throughput of crude oil/gas to determine NPI reporting thresholds based on use, Determining emissions from use of drilling fluids, Two methods for determining fugitive emissions of organic compounds which are NPI substances for different equipment (e.g. valves) at facilities. Determining emissions from venting from crude oil storage tanks, Category 2a and 2b NPI substances – emissions from burning fuel, 5. Assumptions 5.1 Produced Formation Water (PFW) 5.2 Storage tank emissions 5.3 Sources of information 5.4 Emission factors 5.5 Facility specific factors 5.6 Flaring 5.7 Conversion of measurement units (e.g. volume to mass) 6. Definitions and abbreviations 7. References. 7.1 References cited in text 7.2 References not cited in text Appendix 1. Examples of determining emissions using the techniques in this manual A1.1 Determining carbon monoxide emissions from fuel combustion A1.2 Determining fugitive emissions of organic compounds which are NPI substances from different types of pipe fittings A1.3 Determining emissions of organic compounds which are NPI substances from venting which takes place during loading crude oil onto ships Appendix 2. Worksheets to assist you to determine NPI reporting thresholds and emissions.
Tags : emission estimation techniques, oil storage tanks, conversion of measurement units, conversion of measurement, oil gas exploration, australian states and territories, text appendix, oil and gas exploration, fugitive emissions, national pollutant inventory, formation water, storage tank, manual introduction, organic compounds, drilling fluids
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.