Content Inside :
On vehicle service : DRIVE BELT TENSION CHECK AND ADJUSTMENT. ALTERNATOR DRIVE BELT TENSION CHECK. Inspect the drive belt following the instructions below. Standard value. Connect the special tool (belt tension meter set) to the MUT-II. Connect the MUT-II to the diagnosis connector. Turn on the ignition switch and select “Belttension measurement” from the MUT-II menu screen. POWER STEERING OIL PUMP DRIVE BELT TENSION CHECK AND ADJUSTMENT : With your finger tip lightly tap the centre of the belt between the pulleys in the location shown by the arrow in the illustration and then measure the belt vibration frequency. Apply 98N of pressure against the location between the pulleys shown by the arrow in the illustration and then measure the deflection. AIR CONDITIONER COMPRESSOR DRIVE BELT TENSION CHECK AND ADJUSTMENT. (1) Loosen tension pulley fixing nut. (2) Adjust belt tension with adjusting bolt. (3) Tighten fixing nut. (4) Check the belt deflection amount and tension, and readjust if necessary. Caution Check after turning the crankshaft once or more clockwise. Check that ignition timing is at the standard value. Standard value. Before inspection, set the vehicle to the pre-inspection condition. Replace the three way catalyst when the CO contents are not within the standard value, even though the result of the inspection is normal on al items. Attach a three-way union to the vacuum hose between the fuel pressure regulator and the air intake plenum, and connect a vacuum gauge. The abnormal noise which is caused by a problem with the lash adjusters is generated after the engine is started, and will vary according to the engine speed. However, this noise is not related to the actual engine load. Check that the noise occurs immediately after the engine is started, and that the noise changes in accordance with changes in the engine speed. Crankshaft Pulley Removal and installation.
Tags : fuel pressure regulator, mitsubishi l300, crankshaft pulley removal, vacuum gauge, air conditioner compressor, necessary caution, belt tension, intake plenum, vibration frequency, co contents, tension meter, vacuum hose, finger tip, menu screen, tool belt
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.