Content Inside :
Kit features : DIN Radio Provision with Pocket, ISO Mount Radio Provision with Pocket. Disconnect the negative battery terminal to prevent an accidental short circuit. If equipped with center speaker: Unclip and remove the grille (Figure A). Remove (4) Phillips screws securing the speaker. Unplug and remove the speaker. (Figure B). Unclip the panel above the radio including the a/c vents, then unplug hazard switch and remove. (Figure C). Unclip the panel below the radio including the climate controls. Unplug climate controls and remove the panel. (Figure D) Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure A) Slide the aftermarket radio into the cage until it snaps into place. (Figure B). Mount the ISO Brackets to the radio with the screws supplied with the radio. (Figure A). Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit.).
Tags : factory wiring harness, phillips screws, aftermarket radio, nissan rogue, hazard switch, negative battery, battery terminal, figure c, kit features, center speaker, short circuit, metra, brackets, nissan, provision
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.