Contain Information About :
COMBINATION OF INDOOR AND OUTDOOR UNITS, PART NAMES AND FUNCTIONS, ELECTRICAL SPECIFICATIONS (1) Rating conditions, POWER SUPPLY & MODEL NAMES, COMPRESSOR TECHNICAL DATA, ADDITIONAL REFRIGERANT CHARGE, OUTLINES AND DIMENSIONS, WIRING DIAGRAM, COMPRESSOR RUN CAPACITOR, COMPRESSOR PROTECTOR, COMPRESSOR PROTECTOR, REFRIGERANT SYSTEM DIAGRAM, DISASSEMBLY PROCEDURE, OPERATING PROCEDURE, Removing the electrical parts (1) Remove the 3 screws at the front and the 2 screws at the rear of the top panel. (2) Remove the top panel. (3) Remove the screw from the panel cover. Unhook the catches from the side panel and pull the panel cover toward you to remove. (4) Remove the screw from the service panel. Pull down the service panel to unhook the caches. Pull the service panel toward you to remove. Removing the fan motor (1) Remove the 3 screws and the front panel. Open the panel to a 45-degree angle and lift it to remove. The panel is hooked by 3 catches on the left side. (2) Remove the propeller nuts and the propellers. (3) Remove the 3 screws each and the fan motors. Disconnect the lead connectors. Removing the heat exchanger and the compressor NOTE :When removing the panels, move them up and down to unhook catches. (1) Remove the rear panel set screws: 2 screws at the front, 1 screw on the side, and 3 screws at the rear. (2) Remove the valve bed. (3) Open the rear panel rearward to remove. (4) Remove the 4 screws of the right side panel and remove it.
Tags : set screws, mitsubishi electric, split type, fan motors, electrical specifications, model names, fan motor, degree angle, heat exchanger, propellers, capacitor, air conditioners, caches, screw, power supply
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.