Content Inside :
Air conditioners are units that should have the professional technicians do the installation for you. This Instruction Guide is the universal-purpose version for the models of split wall-mounted air conditioners manufactured by our Co. The appearance of the units that you purchase might be slightly different from the ones described in the Guide, but it does not affect your proper operations and usage. Selection of installation positions for indoor unit, To be installed at the position where the air delivered from the unit can reach every corner of the room; Make sure of enough space for installation and maintenance. To take into consideration the operational convenience and safety in installation, it is recommended to ensure enough space between the unit and the walls. Selection of installation positions for outdoor unit, To install the outdoor unit at the places which can stand the load of the machine weight and will not cause big vibrations and noises; Detailed space requirements around the outdoor unit. Installation fixture of indoor unit. .Installation of wall-mounting plate Fix the wall-mounting plate firmly on the wall with screws. Make sure of the leveling of the plate. Slanted wall-mounting plate might jeopardize the smooth discharge of the condensed water. Drill holes on the wall. Drill holes at places slightly below the wall-mounting plate, with hole diameter of 65mm(2-3/5″) and the outer edge of the hole 5-10mm(1/5-2/5″) lower (Fig.2) so that the condensed water can smoothly flow out. Inspections: Check if the hooks at the top and bottom are firmly fixed. Check if the position of the master unit is properly leveled.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible
Tags : wall mounted air conditioners, operational convenience, water drill, hole diameter, drill holes, proper operations, professional technicians, space requirements, enough space, outer edge, air conditioner installation, vibrations, top and bottom, screws, hooks