Content Inside :
Special notes, Safety, COMPRESSOR SPECIFICATIONS, COMPRESSOR INSTALLATION, COMPRESSOR OPERATION, Flow Diagram for the Model ARS-2W (Water Cooled), Flow Diagram for the Model ARS-2A (Air Cooled), MAINTENANCE PROCEDURES, Scheduled Maintenance, Unscheduled Maintenance, Self Sealing Couplings, Gas Cleanup, ELECTRICAL COMPONENTS, Schematic, Component Location, TROUBLESHOOTING. ABSORBER REPLACEMENT SCHEDULE 10,000 Hours (Per Elapsed Time Meter). Air Cooled units must maintain a minimum clearance of at least 12 Inches at both the front and rear grills. Connect the power cable to a
suitable connector or disconnect box making sure that the compressor on-off switch is off. Only qualified electrical service personnel that are familiar with all national, state and local codes should perform this work. With the cover in place and cooling water on for Water Cooled and front and rear grills clear on the Air Cooled, start the compressor and run for 15 minutes to stabilize the compressor oil inventory. Flow Diagram for Model ARS-2W (Water Cooled). The only scheduled maintenance required on the Model ARS-2 Compressor is replacement of the compressor adsorber (AD-125) after every 10,000 hours of operation as indicated on the compressor elapsed time meter. When the compressor is used with 50 Hz power, the actual elapsed time will be 1.2 times that which is shown on the meter.
Tags : rear grills, helium compressor, gas cleanup, suitable connector, compressor installation, maintenance self, compressor operation, time meter, component location, minimum clearance, compressor oil, flow diagram, manual content, unscheduled maintenance, maintenance procedures
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.