Part of Content :
This document specifies performance requirements for the design of thermal, mechanical, and chassis cooling solutions for the AMD Athlon™ and AMD Duron™ processors. In addition to providing design targets, drawings are provided from an AMD-designed solution meeting the requirements of the AMD Athlon and AMD Duron processors. PGA Socket A-Based Processor Thermal Requirements, Socket Description, Socket A is very similar in form factor to previous sockets, such as Socket 7. Socket A incorporates additional pins in the inner portion of the socket. Thus, a thermal solution for Socket A can leverage preexisting design efforts. Socketed Processor Specifications for the AMD Athlon™ Processor Model 6. General Socketed Design Targets, Suggested Thermal Interface Materials, AMD evaluates thermal interface materials for socketed designs. A list of suggested materials tested by AMD is provided in Table 7. If the heatsink needs to be removed, the phase change material must be replaced on the heatsink before re-installing the heatsink. Use a plastic scraper to gently remove the old phase change material from the heatsink. Socket A Heatsink Design Considerations, Clearance in heatsink base for socket cam box. The heatsink base must have enough clearance so that it does not contact the cam box on the socket. The clearance zone is defined in the example shown in the Figure 3 on page 7 and Figure 4.
Tags : amd duron processors, thermal interface materials, phase change material, amd athlon processor, heatsink design, processor specifications, clearance zone, inner portion, processor model, design efforts, thermal solution, cooling solutions, socket 7, design considerations, performance requirements
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.