Part of Content :
Step by step Cold Air Intake Installation Procedure for 2006 Volkswagen MKV 2.5 Rabbit. Special note: This installation guide serves as an outline of the steps needed to install your cold air intake system and is not intended to guide a novice through the installation. If you do not have the proper tools, knowledge and experience to carry out the installation, please seek help from a professional. Cover the wire harness using the provided sheath and zip tie ends to prevent sheath from sliding off. Remove the air duct by removing 2 retainer screws. Carefully remove the secondary air injection and crank case vent “quick connectors” from the MAF flex duct by squeezing the outer ring between your index finger and thumb. Unclip the large spring clamps around the flexi duct that secure it to the throttle body and the MAF. Disconnect the second spring clamp and remove plastic flexi duct from MAF housing. Slide the other side of the MAF into the swedged end of the bracketed pipe. The arrow on the MAF must be pointing towards intake manifold (direction of air flow). Tighten all hose clamps making sure nothing is loose. Remember do not tighten the bracket to the chassis too much otherwise engine movement will be restricted. Push the ambient air temperature sensor into the provided air hole. You should hear it click into position.
Tags : crank case vent, cold air intake, ambient air temperature, ambient air temperature sensor, air intake system, cold air intake system, spring clamps, hose clamps, finger and thumb, air hole, flex duct, zip tie, second spring, air injection, proper tools
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.