Contain Information About :
The Suspension Lift Kit Installation instructions for Ford Expedition 4WD, Before you install this kit, read and understand all instructions, warnings, cautions, and notes in this instruction sheet and in the vehicle owner’s manual. Installation of a suspension lift will change the driveline angles which may cause a noticeable vibration in the vehicle. See the troubleshooting section at the end of these instructions. Lift height may vary depending on vehicle configuration, engine size, additional accessories, the factory suspension package, and vehicle’s condition. Before Starting Installation : Carefully read all warnings and instructions completely before beginning. Verify all parts have been received in this kit by checking the parts list at the end of this document. Wheel & Tire Requirements The factory wheel and tire combination will fit once this kit is installed. Measure ride height with the vehicle supporting its own weight on level ground. To settle the suspension, the vehicle should be driven forward at least 10 feet immediately prior to taking these measurements. Prepare to Install Front Suspension. Using a hydraulic floor jack, slowly lift front axle until front tires are 3-5” off ground. Position jack stands under frame behind lower control arm perches. Lower vehicle onto jack stands while maintaining hydraulic jack pressure underneath front axle. Remove six bolts and torsion bar crossmember from frame rails, Brake Caliper. Remove upper shock nut, two washers, two bushings and shock absorber from perch and vehicle. Larger wheel and tire combination’s increase stress and wear on steering and suspension components, which leads to increased maintenance and higher risk for component failure.
Tags : suspension lift kit, shock absorber, brake caliper, torsion bar, component failure, configuration engine, tire combination, factory suspension, ground position, ford expedition, driveline angles, vehicle configuration, hydraulic jack, suspension package, crossmember
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.