Guide to installing Air Horn on Harley Davidson Motorcycle, procedure : Remove the ½” acorn nut that attaches the stock horn and bracket. Remove the horn & bracket assembly from the stud it is mounted to and unplug the 2 wires. Plug the two wires from the loom onto the relays terminals 30 & 87 (see the wiring diagram provided). Secure the relay to the upper hose as shown using one of the small cable ties. Attach the hose from the loom to the “Y” fitting. Adjust the wires, hose and loom as shown and secure with a small cable at (1A). COMPRESSOR MOUNTING AND WIRING. Due to the vast differences between models and model year changes, it is not possible to have exact instructions for all models; however the mounting locations and methods shown in photos 2, 3 and 4 will apply to over 90% of all installations. Trim the wire and crimp on one of the female blade terminals and attach to the (+) terminal (see wiring diagram included with air horn operations and trouble shooting sheet). Turn ignition on and test horns. Check wires and hoses for neat, secure routing and keeping at least 1/2″ away from the exhaust system. Reinstall seat etc.
Tags : harley davidson motorcycle, exact instructions, cable ties, air horn, harley davidson, exhaust system, loom, acorn, trouble shooting, hoses, relays, horns, 1a, blade, stud
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.