Part of Content :
Step by step guide installing billet VW with ignitor, DISTRIBUTOR REMOVAL : 1. Turn over the engine until it is positioned at top dead center on a compression stroke. 2. Remove the distributor cap, and make sure that the rotor is pointing towards the first cylinder in the firing order. 3. Disconnect the battery negative (-) cable. heck the original distributor for excessive wear, or potential problems. DISTRIBUTOR INSTALLATION 1. Install the original distributor hold-down clamp onto the billet distributor housing. The clamp should sit flat against the distributor collar. 2. Remove the Flame-Thrower billet distributor cap. 3. Turn the distributor drive tang so that it lines up with the distributor driveshaft slot. 6. Place the distributor cap onto the housing. 7. Turn the housing so that the terminal, that represents the first cylinder in the firing order, lines up with the rotor contact terminal. 8. Tighten the hold down and slightly tighten the distributor clamp. Once the ignition timing is adjusted the distributor clamp should be tightened completely. The Flame-Thrower billet distributor can be used in conjunction with most ignition coils rated at 3.0 ohms or greater. For optimum performance purchase and install a Flame-Thrower high performance coil.
Tags : flame thrower, compression stroke, negative cable, firing order, distributor cap, excessive wear, optimum performance, ohms, rotor, ignition coils, billet, heck, tang, vw, high performance
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.