Part of Content :
Ste by step fitting instructions to Fit the Nissan 300ZX Atmo Valve Adaptor with pictures. Please check that the following items have been provided in your 300ZX ATMO adaptor Kit. Aluminum Pipe L : Designed to replace factory boost hose and mount BOV on left side of engine, Aluminum Pipe R: Designed to Replace factory boost hose and mount BOV on right side of engine. 2″ Silicon coupler : Connects between supplied pipe and intercooler. Locate the two boost hoses. Loosen the factory hose clamps securing the boost hoses to the intercooler pipe and throttle body. Loosen the factory hose clamps securing the boost hose on the left side as shown. Remove the boost hoses from both sides, Pre-assemble the left aluminium pipe, the 2” Silicon coupler and the 2.25” Silicon coupler as shown using the hose clamps supplied. Do not fully tighten clamps to allow some adjustment during installation. Connect the two pre-assembled silicon hose assemblies as shown in the diagram below by following steps 12-17. The long 900mm version fits on the left side of the engine and the 700mm version on the right. Locate the factory boost/vacuum sources as shown below. See step 13 & 16 for detailed location. Locate and remove the factory vacuum hose on the left side of the engine.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS.  Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.