Step by step guide maintenance procedure for HP Laser Jet 2300 series. Caution : The fusing assembly may be hot. Power off and unplug the main power cord. Allow the printer to sit for 20 to 30 minutes before performing these maintenance procedures. Transfer Roller Removal and Replacement : Open toner cartridge access door and remove the toner cartridge, Locate white bushing on left side of transfer roller, With a flat blade screwdriver or needle nosed pliers, compress locking tabs on the bushing (Callout 1). Lift left side of roller straight up and slide to the left until clear of the right bushing. Tray 1 Pickup Roller and Separation Pad Removal and Replacement 1. Open toner access door and remove toner cartridge 2. Remove screws from front left and right corners of access opening (Callout 2 ) 3. Lift white plastic shield straight up and off of printer. Rotate the roller and lift it off of the pickup roller shaft 7. To remove old separation pad begin by disengaging the pins on the inner tray from the slots on the outer portion of the tray 1. Remove tray 2 paper tray and place printer on its rear cover 2. Release the locking tab on the white bushing to the right side of the roller and rotate away from printer 90 degrees. NOTE: The “CLEAR MAINTENANCE” selection in the RESETS sub-menu will only appear when “PERFORM PRINTER MAINTENANCE” is displayed on the control panel
Tags : hp laser jet, hp laser jet 2300, nosed pliers, flat blade, pad removal, maintenance procedure, outer portion, printer maintenance, maintenance kit, maintenance procedures, power cord, toner cartridge, screwdriver, screws, shaft
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.