The user’s manual for Honda B16/B18 Supercharger kit, contain information about installation instructions, Performance issue, Tuning Guide and engine building. Step by step instructions with pictures. Take some engine bay pictures for later reference. Make a special drawing of all the coolant hoses going to the different parts of the stock intake, you will need this later on. The same goes for the vacuum hoses to the different parts of the intake. Removal of parts Remove factory airbox and plastic intake hose. Remove the throttle cable from the intake. Remove all air and water hoses from the intake. Remove all electrical connectors from the intake. Remove the fuel pressure line and fuel return line from the fuel rail. Remove the two bolts underneath the intake (intake bracket). Remove all nuts holding the intake. You should now be able to remove the intake. Now you shall try if the M8 fixing bolt fits through the alternator and the tensioner fixing bracket. If it doesn’t fit you must adjust the position of the two offset plates until the M8 fixing bolt fits. Throttle install, Remove the two electrical connectors on the distributor. Also remove the metal bracket holding these connectors. The two connectors are repositioned lower down to make room for the throttle body. Secure the connectors with straps. Install a pressure oil hose (6mm) to the supercharger oil fitting. Make sure the hose is clean (clean out with solvent before install), any dirt will clog the spray nozzle and ruin the supercharger. 2. Ignition energy If you are using high boost your stock Honda ignition system may not be providing enough energy to produce an adequate spark. You have several options here: Try one step colder plugs. (We use NGK BKR7E-N-11). Try Iridium plugs which require less voltage to fire a spark. Use a voltage booster to the ignition coil power supply. Install an aftermarket ignition amplifier (MSD etc.)
Tags : honda b16, factory airbox, iridium plugs, supercharger kit, honda ignition, spray nozzle, stock honda, stock intake, oil hose, metal bracket, pressure oil, intake hose, water hoses, performance issue, fuel rail
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.