Part Of Content :
Important information if you’re the Mitsubishi engineer, Accessing Diagnostic Trouble Codes. Set the ignition switch to “ON”, the Malfunction Indicator (check engine) Lamp will illuminate for a particular duration and a certain number of times. The Lamp will illuminate for 0.5 seconds, then stay Off for 0.5 seconds, this pattern will repeat until the ignition is turned OFF. Code 13
The Lamp will illuminate one time for approximately 0.5 second. Code 23 The Lamp will illuminate two times for approximately 0.5 second with approximately 0.3 second delay between deflections. Clearing Trouble Codes Diagnostic trouble codes may be cleared by disconnecting the battery ground cable for at least 20 seconds. Reconnect negative battery cable and recheck codes to confirm the repair. ECI Voltmeter or Test Light. 1 Oxygen Sensor. 2 Ignition Signal. 3 Air Flow Sensor. 4 Pressure Sensor. 5 Throttle Position Sensor. 6 Idle Speed Control Motor Position Switch. 7 Engine Coolant Temperature Sensor. 10000 Oxygen Sensor. 01000 Crank Angle Sensor. 11000 Air Flow Sensor. 00100 Atmospheric Pressure Sensor. 10100 Throttle Position Sensor. 01100 Motor Position Sensor. 11100 Engine Coolant Temperature Sensor. 00010 No. 1 Cylinder TDC Sensor. 59 Oxygen Sensor (Rear), 4 Cylinder. 59 Left hand Bank Heated Oxygen Sensor, V6. 61 Cable from Transaxle Control Unit, For Transmission 61 Torque Reduction Signal (A/T). 95 Eclipse (Turbo) 96-98 Vehicles OBD2. P0100 Volume Air Flow circuit. P0105 BARO Pressure circuit. P0110 Intake Air Temperature circuit.
Tags : coolant temperature sensor, negative battery cable, throttle position sensor, air flow sensor, engine coolant temperature sensor, engine coolant temperature, obd 1, intake air temperature, oxygen sensor, motor position, angle sensor, ground cable, volume air, position switch, test light
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.
July 15th, 2008 at 12:28 am
Have a 95 talon TSi and engine starts and runs great until it warms up and then will shut off and not restart until it cools. Have new ICM, coil and rebuilt ECM. there seems to be no vacumn leaks… PLEASE HELP