Disassembly guide for iPod Nano 5th generation. step by step instruction with pictures. It’s best to start from the side. (Be careful around the hold switch and headphone jack). It’s easier if you use one soft tool to hold the gap open and then wedge another one in there to work your way side to side. There are several clips holding the frame in place so gently pry up and down while you are moving side to side. Once you have it like this you can proceed. The case is still attached by 2 ribbons at this point so don’t try to remove the back just yet. Remove the Headphone and Hold Switch Cable Use a flat tool to pry up on the brown tab shown and then you can easily remove the orange cable. Remove the HD IDE Cable. To do this simply flip the brown latch shown above up and you should be able to wiggle the cable free. Be careful the cables are delicate.
Tags : headphone jack, generation step, wiggle, latch, ribbons, gap, cables, hd
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.