Step by step installation guide, complete with pictures. This installation guide specifically focuses on the hatchback version of the vehicle. Installation on the sedan will be similar. Part of content : ) Remove covers on both sides of hatch. (below). Use a 10mm socket (with extension) to remove the nuts that secure the rear tail lamps. (right). Remove both of the rear tail lamps. This may require a small amount of force as there are plastic ball/socket joints that hold the lamps in place. Once the lamps are free, disconnect the wiring harnesses from the bulb sockets. (right). Use a flat-head screwdriver to remove the fasteners, and a Phillips-head screw driver to remove the screws, that secure the rear bumper to the body of the car. They are located where the tail lamps normally sit. (right). Use a Phillips-head screwdriver to remove the screws that hold the rear-facing reflectors in place. Then, use a flat-head screwdriver to press on the clip in order to pop out the reflectors. (below). 11) Remove the side-facing reflectors by pressing on the clips and popping them out. (right) 12) Route the wires on the new reflectors through the holes where the reflectors clip into place, then put the new reflectors into place and push them into place. (below).
Tags : rear reflector, wiring harnesses, tail lamps, phillips head, screw driver, 10mm socket, mazda 3, reflectors, rear bumper, fasteners, screws, bulb sockets, hatch, joints, mazda
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.