Installation instructions PERFORMER RPM HYDRAULIC ROLLER CAMSHAFTS for Chevrolet V8 engine. Performer RPM camshafts are ground specifically for use with the corresponding Performer RPM manifolds. Both are dyno-matched and street-proven to work as a team; especially when matched with the Edelbrock Tubular Exhaust Systems. However, the Performer RPM camshaft package may be used by itself. REMOVAL OF ENGINE PARTS BEFORE CAMSHAFT INSTALLATION (Be sure to keep all parts in order) WARNING! DO NOT REMOVE RADIATOR CAP OR RADIATOR HOSES WHILE ENGINE IS HOT! Remove distributor cap and wires, rotate engine until rotor points towards number 1 terminal in cap and pointer on front cover is on top dead center (TDC) and remove distributor (See Fig. 1). Re-install your roller lifters using fresh clean oil on the lifter and the lifter bore just prior to installing. Make sure to re-install the factory guide system. Check to make sure all lifters fit freely in lifter bores. Install intake manifold using new intake gasket set and torque bolts to 25 ft/lbs. Turn the engine over in direction of rotation until the No. 1 intake valve closes and continue until the pointer on the front cover is approximately five degrees before top dead center (BTDC) (See Fig. 1 for firing order).
Tags : chevrolet v8, radiator hoses, roller lifters, radiator cap, v8 engines, gasket set, v8 engine, hydraulic roller, tubular exhaust, firing order, five degrees, distributor cap, intake valve, camshaft, lifter
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.