Contain Information :
GENERAL INFORMATION READING LAMP BULB REPLACEMENT BASIC SETUP AND OPERATION OTHER OPERATIONS AND CONNECTIONS
VP85 SPECIFICATIONS ACCESSORIES SERVICE AND REPAIR RETURNING UNITS FOR REPAIR. The VP85 may be operated from its built-in battery pack or from 110/120V AC, 50-60Hz, using the charger supplied with the unit. When operated in this manner, the charger simultaneously powers the unit and charges the battery pack. However, the lectern will recharge faster with the lectern
power switch turned off. The self-contained batteries in the lectern are very reliable and will generally last for several days usage. The unit should be recharged immediately after each use. 1) Turn volume control completely counter-clockwise 2) Insert gooseneck and/or mic cord plug into lectern 3) Attach microphone to end of gooseneck or cord 4) Push switch on microphone body toward pickup end of microphone 5) Turn BASS & TREBLE controls to center position. EXTENSION SPEAKER OUTPUTS The VP85 is equipped to drive either one or two 2-ohm extension speakers. The LECTROSONICS ES85 Extension Speakers were specially designed to operate with VP85 and are sized so that two speakers will conveniently store inside the lectern. The external speaker jacks are located on a panel located on the right side of the VP85. Each external speaker jack is driven by its own 7-watt amplifier. These amplifiers are idle until the speakers are plugged in. SPEAKER SYSTEM: High efficiency, full range 8″ cone speaker mounted in sealed enclosure. Special 2 Ohm voice coil with a 2 pound magnet assembly. Make sure you have followed the setup procedure and operating instructions. Check out the interconnecting cords and then go through the TROUBLE SHOOTING section in the manual.
Tags : pound magnet, extension speakers, magnet assembly, watt amplifier, speaker jacks, lectrosonics, speaker outputs, external speaker, lamp bulb, high efficiency, reading lamp, voice coil, gooseneck, power switch, battery pack
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.