Read this manual if you would like to upgrade your Audio systems, The simplest way to do this is to tap off the rear input wires and feed these to an a/d/s/ amp as input. We recommend the P450. To control the amount of bass, we would use the AC502 remote subwoofer level control mounted in the front of the car (in the panel under the steering column is a good place). The on-board electronic crossovers built into all a/d/s/ amps will be used to filter the highs from the input signal for subwoofer use. To power this system we’ll use a P650 amp if only one subwoofer is desired and a P850 amp if two subwoofers are chosen. Again, we’ll use the AC502 remote subwoofer level control installed in the front of the car to control the bass level. Wi re colors and pick-up points At the trunk mounted stock amplifier: Our subwoofer speaker(s) could be any of our 8” through 12” models mounted in a sealed box and a secured in the trunk. Since the battery is located in the trunk and the factory amp is also mounted in the trunk, all of our speaker, turn-on, and power connections can be made right in the trunk, making this a simple, quick, and effective addition to the factory sound system.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS.  Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.