Step by step Supercharged system installation instruction, complete with images. INSTALLATION MANUAL Magna Charger FORD 4.8 Liter 3V Engine, 2005-2007 MUSTANG. Relieve the pressure in the fuel tank by removing the cap and re-installing it. IMPORTANT! Ensure vehicle has 91 or higher-octane fuel in it prior to supercharger installation! Disconnect the negative (-) battery clamp using a 7mm wrench. Remove the Positive Crankcase Ventilation (PCV) line from the air tube by pressing the release trigger in the connector and pulling it free. Follow the line to its connection on the cam cover and remove the line completely from the motor.Remove the Electronic Throttle Control
(ETC) connector by sliding the red release latch outward and pulling the connector free. Lift the alternator up off its mounting studs and carefully place it on the passenger side fender well. Protect the fender wall using a thick shop towel or fender cover. Locate the Engine Coolant Temperature (ECT) connector clipped to the steel coolant pipes in the engine valley. Disconnect it by squeezing the release trigger of the connector and pulling it apart.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible
Tags : electronic throttle control, positive crankcase ventilation, engine coolant temperature, magna charger, release latch, supercharger system, side fender, ford mustang, shop towel, negative battery, octane fuel, air tube, crankcase, fuel tank, coolant