Radix Intercooled Supercharger System Installation manual for Avalanche Denali, Tahoe, Suburban & Yukon. Step-by-step instructions for installing the best in supercharger systems. Clean your engine compartment before starting any engine disassembly. Caution: You must have a clean fuel filter - check and replace as needed before installation. You must have a clean air filter - this system comes with a new air filter for your convenience. OE type / Stock spark plugs and stock plug gap is recommended. Start with and use only 91 octane fuel or higher. Remove the fuel tank straps by removing the two strap bolts with a 15mm socket wrench. Gently lower the fuel tank down approximately 18” to gain access to the connections on the top of the tank. Remove the pump, fuel line and retainer from the tank module. These parts will not be reused.
Tags : supercharger system, supercharger systems, octane fuel, plug gap, pump fuel, socket wrench, fuel tank, fuel line, engine compartment, fuel filter, air filter, spark plugs, supercharger, retainer, denali
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.