Content Inside :
Step by step guide Air Intake Modification with pictures, This is a relatively inexpensive modification which may increase air flow into the throttle body. If nothing else, It makes a cool sound. 1. Disconnect the positive battery cable (this will reset the computer to adjust for any increase in air flow which may result from this modification). You will need a 8mm wrench for this. 2. Remove the throttle body cover by removing the three 10mm bolts. (One on passenger side and two on the drivers side of throttle body. Drivers side seen here). 6. Rotate the silencer assembly so as to expose the intake air temperature sensor and unplug the sensor. Installation of the modified silencer assembly is the reverse of the above directions. Make sure the intake air temperature sensor is reconnected as well as the vacuum hoses and battery.
source : http://www.fordf150.net
Tags : intake air temperature sensor, ford f 150, vacuum hoses, intake air temperature, cool sound, battery source, sound 1, battery cable, throttle body, air intake, air flow, 10mm, bolts, ford
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.