Complete Panel Vibration Damper Kit installation guide for Kawasaki Ninja 650R. Keep all hardware (hex screws, washers, spacers, nuts and bolts) in order, separated and labeled, some parts although similar in appearance are in fact of different lengths and thicknesses. Upper Cowling (After disconnecting the turn signal wires and headlamp
connectors) • Main Cowling Panels left and right side • Main Cowling Inner Panels left and right side Headlight Assembly. Remove the two 10mm nuts on each side that secure the mirror assemblies to the frame. Note there is rubber gaskets each side of the upper cowling. Modification Using the following photos as a guideline, install the foam dampers in the positions indicated. Reassembly Reassemble the cowling in the reverse order of disassembly.
Use caution when tightening inner panel screws and headlight bolts. The cowling brackets are thin and can break easily.
Tags:kawasaki ninja 650r, vibration damper, hex screws, 10mm nuts, nuts and bolts
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.