The Toshiba Tecra 780CDM / 780DVD maintenance manual overview, This section explains how to remove Field
Replaceable Units (FRUs). It may not be necessary to remove all the FRUs in order to replace one. To remove the optional PC card, make sure the computer is in boot mode, then follow the steps below. 1. Turn off the power to the computer. Disconnect the AC adapter and all external cables connected to the computer. To disassemble the DVD-ROM drive, follow the steps below. 1. Remove six M2×3 silver screws and two M2.5×6 silver screws securing the
frame to the DVD-ROM drive. 2. Remove the connector cover. 3. Remove the metal frame, connector board, and disconnect the flexible cable. To disassemble the HDD Pack, follow the steps below. 1. Slide the cover firmly in the direction of the arrow and remove it. 2. Remove the HDD tray and connector cover.
Tags : dvd rom drive, external cables, connector board, flexible cable, toshiba tecra, metal frame, field replaceable units, screws, ac adapter, frus, arrow, m2, toshiba
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.