Guide to conversion Automatic transmission to manual transmission on Nissan Pathfinder, how to removing the automatic transmission, Remove the interior, Electronic Control Module Replacement, ASCD Modification, Park Neutral Switch Modification, Clutch activation system, Clutch lines installation, Manual Transmission Wiring, Manual Transmission Installation. . Remove the ashtray. Remove the screw under the ashtray and pull out the bezel that covers the automatic transmission shifter. 2. Remove all screws holding the center console and lift it up. Under
the rear of the console unplug the rear power outlet connection. Make sure the negative battery cable is disconnected. 2. Remove the existing ECM from under the dash above the accelerator pedal. It’s easiest to remove the plastic panel under the steering column. 3. Using a 10mm socket unbolt the ECM’s electrical connector and
unplug. 4. Plug in the electrical connector to the new ECM and tighten the 10mm bolt. 5. Reinstall the ECM.
Tags :
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.