Guide to Install the Elsbett Conversion on Toyota Landcruiser, contain information about : 1 Preliminary notes Fuel system
- See separate fuel diagram - You can keep the existing fuel lines if they are biofuel-resistant and the inner diameter is
greater than 8mm. Otherwise replace with supplied parts. - Fit SVO fuel filter when in colder climate or if fuel consumption is more than 10L/100km - Connect new components only with the supplied biofuel-resistant lines. Electrical system - See separate wiring diagram - Use correct gauge wires and tie new wires to original looms - Fit sufficient length of new wires as they will shorten in colder temperatures. 2 Injector nozzles Replace injector nozzles (Elsbett code 050601) - Same pressure as original nozzles with a maximum tolerance of <= 5bar - Fit new heat washers and seals (Bosch) - Clean seats of injectors before refitting. Installation Instructions Elsbett Conversion Toyota Landcruiser 1HZ. Fuel heat exchanger. Install fuel heat exchanger (Elsbett code 010107)
- Fit before and as close as possible to SVO fuel filter - Fit lower than the connection to the coolant system - Fit in parallel with cabin heater, using t-pieces - Do not fit upside-down. Free Download.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible
Tags : injector nozzles, toyota landcruiser, gauge wires, elsbett, inner diameter, fuel consumption, fuel lines, fuel filter, electrical system, fuel system, conversion, climate, colder temperatures, tolerance, toyota