How to install power-on Brakes on the dodge vehicle PREASSEMBLY INSTRUCTIONS, 1 All parts should be examined for any damage during the shipping and handling process. MOUNTING THE ARMATURE/HUB ASSEMBLY Mount the brake magnet using the 4 holes in the mounting flange. For bushed sizes, secure the TAPER-LOCK bushing per the bushing instruction manual. Do not use lubricant with or on the bushing. DODGE IPB series brakes operate on standard DC voltage. DODGE power supplies are available with a wiring diagram showing the proper electrical
connections. MAINTENANCE GUIDE, To ensure that drive is not unexpectedly started, turn off and lock out or tag power source before proceeding. Failure to observe these precautions could result in bodily injury. PROCEDURE, Remove the snap ring from the back of the splined hub. This requires complete removal of the brake. TROUBLE SHOOTING GUIDE, SYMPTOM/CAUSE, Solutions.
Tags : trouble shooting guide, series brakes, taper lock bushing, dodge power, hub assembly, maintenance guide, snap ring, dc voltage, electrical connections, armature, bodily injury, shipping and handling, power source, lubricant, clutches
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.