Content Inside :
Disconnect negative battery cable. Remove factory valve cover breather hose from intake tube and discard.
Retain plastic valve cover fitting for later use. Using a 5/16” socket, remove the three nuts and bolts mounting the factory air filter housing to inner fender. Remove air filter housing. Disconnect the electrical connector to the air temp sensor on the backside of the factory intake tube and remove sensor. Retain sensor for later use. For 1997-2004 vehicles only: Install the supplied rubber grommet with out the hole into the Airaid intake tube. Install the weather strip on the edge of the Cool Air Dam assembly as shown above. Reconnect negative battery
cable. Double-check your work to be certain that all nuts, bolts, and clamps are securely fastened.
Tags : negative battery cable, rubber grommet, nuts bolts, nuts and bolts, jeep wrangler, inner fender, weather strip, intake tube, plastic valve, airaid intake, air dam, electrical connector, air temp, valve cover, cool air
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.