Content Inside :
Intake systems installation manual for Toyota Tacoma 2005-2007, Tools Required For Installation: 5/16”,10mm, 12mm,and 13mm Sockets Ratchet & Extension Phillips Head Screw Driver, Install the supplied 6mm bolt (#12) and
washer (#13) thru the tab on the CAD and into the threaded hole in the side of the fender. Install the Airaid Premium Filter (#1) on the CAD tube and tighten the clamp. Next install the weather strip (#7) on top of the CAD as shown. For an easier install, start at the fender side of the CAD and work your way towards the radiator. ! The air filter is reusable and should be cleaned using the Airaid Filter Tune-Up Kit periodically.
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS.  Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.