Repair manual for iPod Nano Gen 2 Disassembly guide, Tools Needed Soft Tools – used to open the case without scratching, Small Phillips head screwdriver ESD bracelet Anti Static Mat, Be sure the Hold Switch is turned on. You will see orange when you have the hold in the correct position. Using 1 soft tool wedge it into the side of the iPod. It is preferred to stay away from the hold switch and the headphone jack. Remove the hidden screw under the headphone plug. You should use a flat tool and be sure not to damage the charger port when you are sliding it out. It slides out fairly easily but you need to make sure you don’t catch the headphone plug or the ClickWheel.
Tags : headphone jack, ipod nano, phillips head, soft tools, head screwdriver, anti static mat, correct position, screw
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.