Content Inside :
Installation instruction for Nissan KA24DE engine, 1. It is highly recommended that an oil and filter change be done before installing new cams. 2. Remove the plug wires, and valve cover from the engine. Use caution not to drop anything into the engine. CAMSHAFT INSTALLATION INSTRUCTIONS FOR NISSAN KA24DE ENGINES W/DOUBLE ROW CHAIN (SEE LAST PAGE FOR USING JWT CAMS IN KA24DE W/SINGLE ROW ) Mark the cam bearing caps if not already marked on both the intake and exhaust sides and note that the arrows are pointing to the front of the engine. Oil gallery plugs MUST BE installed in the rear of each cam ! Apply a coating of assembly lube or motor oil to all journals and lobes, take cam is the one that has the dowel pin aligned with the #1 lobe (see diagram). Inspect your work carefully. Recheck the cam timing, the crank should be on the TDC mark, the cam sprockets and chain should look like the diagram.
Tags : nissan ka24de, ka24de engine, camshaft installation, tdc mark, cam sprockets, engine camshaft, dowel pin, exhaust sides, oil gallery, assembly lube, cam timing, filter change, plug wires, camshaft, valve cover
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.