Content Inside :
All installations should be checked for possible interference between the communications equipment and vehicle electronics. Mobile radio equipment with greater than 100 Watts output may require special precautionary measures beyond those outlined in this document. This pamphlet is provided as a supplement to the radio manufacturer’s installation instructions for installing communication equipment in Ford vehicles. Listed on page 4 are some additional sources of information. a. A transceiver location should be selected that provides a solid mounting point which does
not interfere with the vehicle operator controls and provides adequate ventilation. NOTE: Do not mount any transceiver, microphones, speakers, or any other item in the deployment path of the airbag system. b. Before using screws to mount the tranceiver equipment, be sure to check for vehicle wiring under the carpet or behind the instrument panel which could be pinched, cut, or otherwise damaged. Radio Wiring and Routing, Use caution when routing wires between the passenger and engine compartments to avoid chafing or pinching of wires. Use grommets over any exposed sharp edges and strain reliefs to keep wires in place. Seal all holes to prevent moisture intrusion. Troubleshooting a. Should vehicle-radio interaction develop following installation, the source of the problem should be identified prior to further operation of the vehicle. Most interaction problems can be eliminated by following these installation guidelines.
Tags : mobile radio equipment, strain reliefs, moisture intrusion, radio installation guide, interaction problems, adequate ventilation, ford vehicles, radio wiring, radio manufacturer, precautionary measures, vehicle electronics, engine compartments, airbag system, vehicle operator, sharp edges
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.