Read instructions several times before starting. Be sure you have all needed parts and know where they install. Read each step completely as you go. 1) PREPARE VEHICLE… Place vehicle in neutral. Raise front of vehicle with a jack and secure a jack stand beneath each frame rail, behind the front trailing arms. Ease the frame down onto the stands, place transmission in low gear or “park”, and chock rear tires. Remove front tires. Position a jack so that it supports, but does not raise, the front axle. 2) TRACK BAR… Remove the bolts securing the front track bar to the axle and frame. The bar and hardware will not be re-used. 3) ANTI-SWAY BAR LINKS AND SHOCK ABSORBERS…
Remove and discard the front anti-sway bar links. Save all hardware for re-use. Remove and discard the shock absorbers. Save all hardware for re-use. Remove the rear anti-sway bar links and save all hardware for re-use. The factory rear anti-sway bar links will be installed on the front in a later step. COIL SPRINGS, SHOCK ABSORBERS. please read the factory service and repair manual first.
Tags : superlift suspension systems, sway bar links, jeep wrangler, anti sway bar, shock absorbers, rear tires, frame rail, trailing arms, coil springs, 4wd, jk, bolts, several times, jeep, tires
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.