Content Inside :
If the coolant becomes slushy or frozen, the heater’s coolant pump cannot move the coolant properly causing a
blockage of the circulating system. Once this occurs, pressure will build up rapidly in the heater and the coolant hose could either burst or blow off at the connection point to the heater. This situation could cause engine damage and/or personal i n j u r y. Extreme care should be taken to ensure a proper mixture of water and antifreeze is used in the coolant system.Refer to the engine manufacturer’s or coolant manufacturer’s recommendations for your specific requirements. During electrical welding work on the vehicle disconnect the power to the heater in order to
protect the control unit. Drill holes in sending unit to accomodate Espar pick up pipe - drill 2 small holes first. See diagram.
Tags : coolant pump, coolant system, coolant hose, proper mixture, ford diesel, drill holes, diesel engines, engine manufacturer, installation troubleshooting, hydronic, coolant, extreme care, antifreeze, ford
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.