Prep: layout a canvas under your car, layout a couple of paper towels under the car to set the valve body on later, layout a couple of paper towels on your workbench to receive the valve body once it is removed. Towards the upper right, remove the bolt with the rooster comb spring (has a roller attached to it ), makes sure to keep the bolt in the hole of the spring as to not lose the orientation of either piece.
• Note the position of the manual valve. It is the piston looking thing and has a notch in it in which a pin on the detent lever resides.
• Remove the bolts in the plated section, all but one in the center most section. o Now get your drain pan ready as here comes the tranny fluid shower
• Slowly back out the last bolt about a quarter of an inch and wiggle the valve body slightly so
that tranny fluid starts flowing. o Let this drain for 15 – 20 minutes (should be about 3-4 quarts).
Service and repair manual complement.
Tags : ford 4r70w transmission, rooster comb, 4 quarts, paper towels, manual valve, valve body, drain pan, tranny fluid, wiggle, workbench, piston, bolt, bolts, notch, complement
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.