Content Inside :
Paint gears with machinist’s blueing and assemble components (3 thru 28–Fig. 2-3) using original shims removed
during disassembly. Rotate drive shaft to produce mesh pattern and measure gear backlash at splined end of drive
shaft. Backlash measured against splines should be 0.04-0.08 mm (0.0016-0.0032 in.) which gives a back. lash of 0.10-0.20 mm (0.004-0.008 in.)
on gears. Disassemble and change number or size of shims (10) to adjust mesh position of drive gear, and change
number or size of shims (21) to adjust backlash. Install as many shims (6) as necessary to obtain zero end play in
drive shaft. Always check end play after adjusting mesh position of drive gear (12).
Tags : mesh pattern, drive shaft, overhaul service, blueing, end play, manual content, gear backlash, aquamatic, shims, machinist, gears, volvo, paint
If you see unrelated pdf files with the description or copyrighted material published, please report to us, we'll correct/delete it it as soon as possible.NONE OF THOSE MATERIALS ARE HOSTED IN THIS SERVER NOR UPLOADED BY ME IN SOMEONE'S SERVERS. Read our DISCLAIMER for more detail.
We are neither affiliated with authors and brands nor responsible for its content and change of content.
Information contained herein is provided "as is" without warranty of any kind, either expressed or implied, including any warranty of merchantability or fitness for a particular purpose. In no event shall ANYONE be held liable for any loss of profit, special, incidental, consequential, or other similar claims.